Why You Need Kinamax TS-9900 Drivers for Your Wireless USB Adapter and How to Get Them
How to Download and Install Kinamax TS-9900 Drivers for Windows 10
If you are looking for a high-power wireless USB adapter that can enhance your wireless signals and save you money on LAN cables, you might want to consider the Kinamax TS-9900. This device uses the Ralink 3070 chip and has a working range of up to 5 km. It can transmit data at a speed of 150 Mbps and comes with a 5m USB cable. However, to use this device on your Windows 10 computer, you need to download and install the correct drivers. In this article, we will show you how to do that in a few simple steps.
kinamaxts9900driversdownload
Step 1: Download the Kinamax TS-9900 Drivers
The first step is to download the Kinamax TS-9900 drivers from a reliable source. You can use the link below to download the drivers from the official website of the manufacturer:
https://www.kinamax.com/drivers/TS-9900.zip
Alternatively, you can also use a third-party website that offers the drivers for free, such as:
https://www.driverguide.com/driver/detail.php?driverid=1866859
However, be careful when downloading drivers from third-party sources, as they may contain malware or viruses. Always scan the downloaded files with an antivirus software before opening them.
Step 2: Extract the Kinamax TS-9900 Drivers
Once you have downloaded the drivers, you need to extract them from the zip file. To do that, follow these steps:
Right-click on the zip file and select "Extract All".
Choose a destination folder where you want to save the extracted files and click "Extract".
Open the destination folder and locate the folder named "TS-9900".
Step 3: Install the Kinamax TS-9900 Drivers
Now that you have extracted the drivers, you need to install them on your Windows 10 computer. To do that, follow these steps:
Plug in your Kinamax TS-9900 wireless USB adapter to an available USB port on your computer.
Open the "TS-9900" folder and double-click on the file named "Setup.exe".
Follow the on-screen instructions to complete the installation process.
Restart your computer if prompted.
Congratulations! You have successfully installed the Kinamax TS-9900 drivers for Windows 10.
You can now enjoy the benefits of using this high-power wireless USB adapter on your Windows 10 computer. You can check if the device is working properly by opening the Device Manager and looking for "Kinamax TS-9900 Wireless Network Adapter" under "Network adapters". If you see a yellow exclamation mark or a red cross next to it, it means there is a problem with the device or the driver. In that case, you may need to update or reinstall the driver or contact the manufacturer for support.
How to Troubleshoot Kinamax TS-9900 Drivers for Windows 10
Even though you have installed the Kinamax TS-9900 drivers for Windows 10, you may still encounter some issues with the device or the driver. For example, you may experience poor wireless signal, slow internet speed, frequent disconnections, or blue screen errors. In this section, we will show you how to troubleshoot some common problems with the Kinamax TS-9900 drivers for Windows 10 and how to fix them.
Problem 1: Poor Wireless Signal
If you are getting a weak or unstable wireless signal from your Kinamax TS-9900 wireless USB adapter, you may need to adjust the position or orientation of the device or the antenna. To do that, follow these steps:
Move your Kinamax TS-9900 wireless USB adapter away from any sources of interference, such as metal objects, cordless phones, microwaves, or other wireless devices.
Place your Kinamax TS-9900 wireless USB adapter in a higher or more open location, such as on top of a desk or a shelf.
Rotate or tilt your Kinamax TS-9900 wireless USB adapter or the antenna until you get a better signal strength.
Check the signal strength indicator on your computer or use a software tool such as inSSIDer to monitor the wireless signal quality.
Problem 2: Slow Internet Speed
If you are getting a slow internet speed from your Kinamax TS-9900 wireless USB adapter, you may need to check your network settings or your internet service provider. To do that, follow these steps:
Make sure you are connected to the right wireless network and that you have entered the correct password.
Make sure your wireless network is secured with WPA2 encryption and that you have changed the default SSID and password of your router.
Make sure your router is updated with the latest firmware and that it is configured properly for your internet service provider.
Make sure your internet service provider is not experiencing any outages or slowdowns in your area. You can contact them or check their website for more information.
Run a speed test on your computer or use a software tool such as Speedtest.net to measure your internet speed. If it is lower than expected, you may need to upgrade your internet plan or switch to a different provider.
Problem 3: Frequent Disconnections
If you are getting frequent disconnections from your Kinamax TS-9900 wireless USB adapter, you may need to update or reinstall the driver or check your power settings. To do that, follow these steps:
Go to the Device Manager and right-click on "Kinamax TS-9900 Wireless Network Adapter" under "Network adapters". Select "Update driver" and follow the instructions to update the driver online or from a local file.
If updating the driver does not work, go to the Device Manager and right-click on "Kinamax TS-9900 Wireless Network Adapter" under "Network adapters". Select "Uninstall device" and confirm. Then, restart your computer and reinstall the driver using the Setup.exe file from the "TS-9900" folder.
If reinstalling the driver does not work, go to the Control Panel and click on "Power Options". Select "Change plan settings" for your current power plan and click on "Change advanced power settings". Expand "Wireless Adapter Settings" and "Power Saving Mode" and set both options to "Maximum Performance". Click on "OK" and save the changes.
Problem 4: Blue Screen Errors
If you are getting blue screen errors from your Kinamax TS-9900 wireless USB adapter, you may need to check for hardware conflicts or malware infections. To do that, follow these steps:
Go to the Device Manager and look for any devices with a yellow exclamation mark or a red cross next to them. These indicate hardware conflicts or errors. Try to update, disable, or uninstall these devices and see if the problem persists.
Scan your computer with an antivirus software and remove any malware or viruses that may be causing the blue screen errors. You can use a software tool such as Malwarebytes Anti-Malware to perform a thorough scan of your system.
If none of these steps work, you may need to contact the manufacturer of your Kinamax TS-9900 wireless USB adapter or seek professional help from a computer technician.
How to Use Kinamax TS-9900 Wireless USB Adapter for Different Purposes
Now that you have installed and troubleshooted the Kinamax TS-9900 drivers for Windows 10, you may wonder how to use this device for different purposes. In this section, we will show you some examples of how to use the Kinamax TS-9900 wireless USB adapter for various scenarios.
Scenario 1: Connecting to a Wireless Network
If you want to connect your Windows 10 computer to a wireless network using the Kinamax TS-9900 wireless USB adapter, you can follow these steps:
Click on the network icon on the lower right corner of your screen and select "Network & Internet settings".
Click on "Wi-Fi" and make sure it is turned on.
Click on "Show available networks" and look for the wireless network you want to connect to.
Click on the wireless network and enter the password if required.
Click on "Connect" and wait for the connection to be established.
Scenario 2: Creating a Wireless Hotspot
If you want to create a wireless hotspot using your Windows 10 computer and the Kinamax TS-9900 wireless USB adapter, you can follow these steps:
Click on the network icon on the lower right corner of your screen and select "Network & Internet settings".
Click on "Mobile hotspot" and make sure it is turned on.
Choose "Wi-Fi" as the source of your internet connection and select "Kinamax TS-9900 Wireless Network Adapter" as the network adapter.
Edit the network name and password as you wish and click on "Save".
Now you can share your internet connection with other devices that can connect to your wireless hotspot.
Scenario 3: Cracking a Wireless Network Password
If you want to crack a wireless network password using your Windows 10 computer and the Kinamax TS-9900 wireless USB adapter, you can follow these steps:
Download and install a software tool such as Aircrack-ng or Wireshark that can capture and analyze wireless packets.
Launch the software tool and select "Kinamax TS-9900 Wireless Network Adapter" as the interface.
Scan for the wireless network you want to crack and note down its BSSID, channel, and encryption type.
Start capturing packets from the target network and wait until you collect enough data.
Analyze the captured packets and use a software tool such as John the Ripper or Hashcat to crack the password using brute force or dictionary attack methods.
Note down the cracked password and use it to connect to the target network.
Conclusion
In this article, we have shown you how to download and install the Kinamax TS-9900 drivers for Windows 10, how to troubleshoot some common problems with the device or the driver, and how to use the device for different purposes. We hope this article has been helpful and informative for you. If you have any questions or feedback, please feel free to leave a comment below. Thank you for reading! b99f773239